Search Our Knowledge Base

All
checkbox Allcheckbox Consulting & Working Paperscheckbox Manualscheckbox Notes
All
checkbox Allcheckbox BCGcheckbox BCPcheckbox CTGcheckbox CTP
All
checkbox Allcheckbox Advanced Developmentcheckbox Consulting & Configurationcheckbox Correction - Calculationscheckbox Correction - PMC & GMCcheckbox Correction - SAP Integrationcheckbox Documentationcheckbox Technical Information
Back (Inactive) 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 Next Documents 1 - 10 (83 total)
FileDocument TypeCategoryDateBCS Products
Note 000082 - Business Doc. Analysis-Init. UoM MSEGO2 Lines

The Business Document Analysis for a material document reports a QCI check calculation error, which cannot be explained. If the log is inspected in detail, an error message claiming that a unit of measure is initial can be found. (2 pages)

Type: Notes Category: Correction - SAP Integration Date: 2019-04-17 Products: BCP, BCG, CTP, CTG
NotesCorrection - SAP Integration2019-04-17/wp-content/uploads/icon-bcp-1.png /wp-content/uploads/icon-bcg-1.png /wp-content/uploads/icon-ctp-2.png /wp-content/uploads/icon-ctg-2.png
Note 000067 - BCS 3.0 Additional Installation Information

"Must-Read" information for installation of BCS, or the upgrading of BCS or BCP installations. (7 pages)

Type: Notes Category: Technical Information Date: 2019-04-17 Products: BCP, BCG, CTP, CTG
NotesTechnical Information2019-04-17/wp-content/uploads/icon-bcp-1.png /wp-content/uploads/icon-bcg-1.png /wp-content/uploads/icon-ctp-2.png /wp-content/uploads/icon-ctg-2.png
Note 000081 - SAP Note 397003 Integration

SAP transaction MIGO dumps "randomly" if a mix of positive and negative quantity values is posted - e.g. if some quantity values are manually changed to be negative for a positive transaction quantity (for tolerances higher 100 % such values are accepted). (2 pages)

Type: Notes Category: Advanced Development Date: 2019-04-03 Products: BCP, BCG, CTP, CTG
NotesAdvanced Development2019-04-03/wp-content/uploads/icon-bcp-1.png /wp-content/uploads/icon-bcg-1.png /wp-content/uploads/icon-ctp-2.png /wp-content/uploads/icon-ctg-2.png
Calculation Issue Questionnaire

Complete this questionnaire and attach it to a Calculation Issues Ticket when raising a calculation issue with us (via the Service Portal). This enables us to efficiently and effectively work with you to resolve your issue. (NOTE: Word 2010 or above required to view/edit) (18 pages)

Type: Manuals Category: Correction - Calculations Date: 2019-03-30 Products: BCP, BCG, CTP, CTG
ManualsCorrection - Calculations2019-03-30/wp-content/uploads/icon-bcp-1.png /wp-content/uploads/icon-bcg-1.png /wp-content/uploads/icon-ctp-2.png /wp-content/uploads/icon-ctg-2.png
Bulk Calculations Petroleum BCP 3.0 - Supported Standards Manual

A complete definition of all standards supported by BCP. E.g. Calculation models, CTPL, Mass / Weight & UoM Conversion Factors. ASTM D1250 Product-specific Anexes (e.g. Crude Oil, MTBE, etc.) well as other products (e.g. LPG, Aromatics, Asphalt, Butadiene, etc.) CPL Integrations, Standard Range Limit Extensions and Installation test details. (24 pages)

Type: Manuals Category: Documentation Date: 2019-03-11 Products: BCP
ManualsDocumentation2019-03-11/wp-content/uploads/icon-bcp-1.png
Note 000080 - Support of ASTM D1550-18 Butadiene - ASTM D2962 Compliance Conf.

ASTM D1550 has been issued as a new, changed version in 2018 requiring a new MQCI implementation function
set of ASTMD1550-2018. ASTM D2962-10(2019) from January 2019 compliance is documented. (5 pages)

Type: Notes Category: Advanced Development Date: 2019-03-11 Products: BCP
NotesAdvanced Development2019-03-11/wp-content/uploads/icon-bcp-1.png
Note 000076 - ISO 6578:2017 Compliance Enhancements

ISO 6578:2017 has been published in 2017. This second edition cancels and replaces the first edition (ISO 6578:1991), which has been technically revised. (2 pages)

Type: Notes Category: Correction - Calculations Date: 2019-01-22 Products: BCP, BCG, CTP, CTG
NotesCorrection - Calculations2019-01-22/wp-content/uploads/icon-bcp-1.png /wp-content/uploads/icon-bcg-1.png /wp-content/uploads/icon-ctp-2.png /wp-content/uploads/icon-ctg-2.png
Note 000079 - Business Document Analysis - Automatically Generated Lines

Inconsistencies are noticed when analysing business documents using the PMC / GMC tools. (2 pages)

Type: Notes Category: Correction - SAP Integration Date: 2018-11-16 Products: BCP, BCG, CTP, CTG
NotesCorrection - SAP Integration2018-11-16/wp-content/uploads/icon-bcp-1.png /wp-content/uploads/icon-bcg-1.png /wp-content/uploads/icon-ctp-2.png /wp-content/uploads/icon-ctg-2.png
Note 000066 - License Installation Issue After System Copy With SID Rename

Effects all releases before 3.0, where QuantityWare licenses were reported as inactive and could not be applied again. (2 pages)

Type: Notes Category: Correction - PMC & GMC Date: 2018-08-29 Products: BCP, BCG, CTP, CTG
NotesCorrection - PMC & GMC2018-08-29/wp-content/uploads/icon-bcp-1.png /wp-content/uploads/icon-bcg-1.png /wp-content/uploads/icon-ctp-2.png /wp-content/uploads/icon-ctg-2.png
Note 000077 - BCS 30x Collective Note - Corrections & Enhancements

BCS 30x Collective Note - Corrections & Enhancements (3 pages)

Type: Notes Category: Correction - SAP Integration Date: 2018-08-29 Products: BCP, BCG, CTP, CTG
NotesCorrection - SAP Integration2018-08-29/wp-content/uploads/icon-bcp-1.png /wp-content/uploads/icon-bcg-1.png /wp-content/uploads/icon-ctp-2.png /wp-content/uploads/icon-ctg-2.png
Back (Inactive) 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 Next Documents 1 - 10 (83 total)