Search QuantityWare

Search Our Knowledge Base

We have a wide range of manuals, notes and consulting & working papers to assist our customers and consultants with QuantityWare BCS, which you can browse below. If you have a question regarding QuantityWare BCS, please search on our Frequently Asked Questions.
All
checkbox Allcheckbox Consulting & Working Paperscheckbox Contractscheckbox Manualscheckbox Notes
All
checkbox Allcheckbox BCGcheckbox BCPcheckbox CTGcheckbox CTP
All
checkbox Allcheckbox Advanced Developmentcheckbox Consulting & Configurationcheckbox Correction - Calculationscheckbox Correction - PMC & GMCcheckbox Correction - SAP Integrationcheckbox Documentationcheckbox Technical Informationcheckbox Usage Definitions
Documents 1 - 6 (6 total)
File Document Type Category Date BCS Products
Bulk Calculations Petroleum BCP 3.0 - Supported Standards Manual

A complete definition of all standards supported by BCP. E.g. calculation models, CTPL, mass / weight & UoM conversion factors. ASTM D1250 product-specific annexes (e.g. Crude Oil, MTBE, etc.) well as other products (e.g. LPG, aromatics, asphalt, butadiene, etc.) CPL integrations, standard range limit extensions and BCP Installation Test details. (27 pages)

Type: Manuals Category: Documentation Date: 2023-07-28 Products: BCP
Manuals Documentation 2023-07-28 /wp-content/uploads/icon-bcp-1.png
Note 000101 - Measurement Standards - Development Planning

This note lists all measurement standards which are under consideration for addition into the QuantityWare supported standards portfolio, or have been revised and require additional developments. (3 pages)

Type: Notes Category: Documentation Date: 2023-04-28 Products: BCP, BCG
Notes Documentation 2023-04-28 /wp-content/uploads/icon-bcp-1.png /wp-content/uploads/icon-bcg-1.png
Bulk Calculations Gas BCG 3.0 - Supported Standards Manual

A complete definition of all standards supported by BCG. E.g. calculation models, calculation of densities & heating values from composition, compression factor standards & UoM conversion factors. Physical property range limits as well as specific standard implementation and BCG Installation Test details. (21 pages)

Type: Manuals Category: Documentation Date: 2022-12-28 Products: BCG
Manuals Documentation 2022-12-28 /wp-content/uploads/icon-bcg-1.png
Note 000112 - Tank Capacity Defaulting When Creating Tank Dips

In SAP Silo Management, tank capacity should be defaulted within SAP transaction O4_TIGER and passed to the QCI as a calculation parameter. This is not available with the SAP standard delivery but can be resolved by using this Generic Customer Development. Such implementation is only supported through QW-Certified consultants. (3 pages)

Type: Notes Category: Consulting & Configuration Date: 2022-12-23 Products: BCP
Notes Consulting & Configuration 2022-12-23 /wp-content/uploads/icon-bcp-1.png
Compliance & Transparency - Gas CTG 3.0 - Supported Standards Manual

A complete definition of all standards supported by CTG. E.g. Calculation models, CTPL, Densities & Heating Values, Mass / Weight & UoM Conversion Factors. Physical property range limits as well as Installation test details. (11 pages)

Type: Manuals Category: Documentation Date: 2021-09-26 Products: CTG
Manuals Documentation 2021-09-26 /wp-content/uploads/icon-ctg-2.png
Compliance & Transparency - Petroleum CTP 3.0 - Supported Standards Manual

A complete definition of all standards supported by CTP. E.g. Calculation models, CTPL, Mass / Weight & UoM Conversion Factors, and Instllation test details. (12 pages)

Type: Manuals Category: Documentation Date: 2021-09-26 Products: CTP
Manuals Documentation 2021-09-26 /wp-content/uploads/icon-ctp-2.png
Documents 1 - 6 (6 total)