Search QuantityWare

All News

Standards Update: ASTM D1555 and ASTM D1555M

| News

Standards ASTM D1555 and ASTM D1555M – Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane (Metric) – have been revised and issued as new 2016 versions. QuantityWare has carefully analyzed these new versions. Since both ASTM D1555-16 and ASTM D1555M-16 require usage of the volume correction factor without rounding in calculations, new implementations are required to cover this new definition. The new implementations will be made available as advanced development within a note in Q4 2017, combined with an instruction guide how to migrate existing ASTM D1555 conversion groups to this new methodology. Template extensions will be shipped with the next BCS 3.0 CSP.

BCS 3.0 CSP01 Released

| News

With support for new standards and revised versions, usability and minor corrections, this CSP also contains the first standard implementation of API MPMS Ch.12, S&W Corrections – GSM/GSW and NSM/NSW – parallel calculations for SAP Oil & Gas systems. See the release Notes for further details. The Release Notes can be found on our Knowledge Base.

Standards Update: ISO 6976

| News

The third edition of the standard “ISO 6976 Natural gas – Calculation of calorific values, density, relative density and Wobbe indices from composition” was issued in 2016. Through technical revision, it cancels and replaces the second edition from 1995. As stated in the third editions’ introduction, adoption of the revisions detailed in this standard will not be without cost, as instrumental (and ERP business) software will need updating. QuantityWare has carefully analyzed this third edition. The major technical changes are:
1) New method to calculate ideal and real molar-based calorific value and thus subsequent calorific values (mass and volume based)
2) Introduction of net Wobbe index
3) New component data (n-dodecane, n-tridecane, n-tetradecane, n-pentadecane)
4) Completely updated physical property data and auxiliary constants
5) Harmonization with GPA 2172 and related U.S. customary based standards – Provision of different reference pressures in all formulas of ISO 6976
QuantityWare will provide new implementations and integration configuration options for ISO 6976(2016) with BCS 3.0 CSP02, which is currently planned for release in Q1 2019.

BCS 3.0 CSP01 Release Notes

| News

Technical consolidation of BCS Release 3.0 CSP01 will start on 03.01.2017, the target release date is 31.03.2017. The appropriate Release Notes for BCS 3.0 CSP01 have just been published, describing the final delivery content which will be shipped. The Release Notes can be found on our Knowledge Base.

Standards Update: API MPMS Chapter 11.3.3

| News

“API MPMS Chapter 11.3.3 – “Miscellaneous Hydrocarbon Product Properties – Denatured Ethanol Density and Volume Correction Factors” has been issued as a second edition in November 2015. QuantityWare has analyzed this new version and confirms that BCP implementations of API MPMS Chapter 11.3.3 comply with this latest version. With BCS 3.0 CSP01, four new API MPMS 11.3.3 template conversion groups will be delivered”

BCS 3.0 Released

| News

Support release 3.0 of our solution BCS on ERP 6.0 is now available.
All customers with valid maintenance agreements have access to this release as a part of their maintenance service.
The single 3.0 ECC600 technical delivery can be used as an initial install, or be installed “on top” of an existing 10A or 10B system with very little effort. The Release Notes can be found on our Knowledge Base.

Standards Update: ASTM D633

| News

ASTM D633 – Standard Volume Correction Table for Road Tar – has been re-approved and issued as ASTM D633-11(2016). QuantityWare has analyzed this new version and confirms that BCP implementations of ASTM D633 comply with this latest version. As in the previous versions, two apparent typographical errors have been identified and communicated to the ASTM subcommittee for possible correction.

Standards Update: AGA 3 Part 2 – API MPMS 14.2.1

| News

AGA Report No. 3 – ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS PART 2: Specification and Installation Requirements – has been revised and released as 5th Edition in March 2016. Part 2 of this standard has no impact on the technical installation of Natural Gas Applications (Part 3) or Implementation Procedures (Part 4). However, organizations utilizing the implementation as defined in Part 3 and Part 4 are advised to obtain Part 2 as a reference. No changes of the technical software implementations are required.

ISO 13443(1996) Calculations Working Paper

| News

Without detailed background knowledge of the standards’ implementation guidelines (i.e. lack of detail therein) and SAP CUNI implementation, it is possible to attain differing results from those expected when performing ISO 13443(1996) calculations with BCS 3.0. This paper defines in detail why such variations occur in the Temperature Dimension. The Working Paper can be found in our Knowledge Base.

Search